FAQs
1st Day After Installation
Cleaning You Floor
1st Day After Instllation
Fill a bucket with water and using a clean mop, mop approximately 150 square feet of floor allowing liberal amount of water to remain on the floor. Empty bucket, refill with water and do another 150 square feet. Let water stand on the floor for approximately 30 minutes, then dry mop. Do this for 2 days consecutively. This process will cure the grout, making it stronger and more uniform in color.
Back to Top
Cleaning You Floor
If you have selected a light color grout, use clean water and a small amount of mild detergent such as dish washing or laundry detergent. Mop your floors, changing the water when it becomes clouded with dirt. If you have selected a dark color grout, use a small amount of Pine Sol or Murphy's Soap Oil in your water, again changing the water when it becomes clouded with dirt. Some "high Shine" tiles may need to be towel dried to prevent water spots.
Back to Top
Back to Top |
|
